Measurements:

Product	Size	Quantity	Details
166704	12” x 12”	2	Basic Black Two-Tone: Both pages
165566	2” x 12”	2	On The Go, Luggage: Both pages
165566	½” x 12”	4	On The Go, Green Dots: Both pages
165566	½” x 3 ½”	1	On The Go, Green Dots: Left page
165566	½” x 4”	2	On The Go, Green Dots: Left page
165566	½” x 7”	1	On The Go, Green Dots: Right page
165566	3 ¾” x 4”	1	On The Go, Green Drawing: Left page
165566	4” x 3”	2	On The Go, Green Drawing: Right page
165566	1” x 4”	1	On The Go, Green Drawing: Right page
163795	3” x 4”	2	Shy Shamrock: Left page
163795	5 ¼” x 4”	1	Shy Shamrock: Left page
163795	7” x 4”	1	Shy Shamrock: Right page
163795	3 ½” x 4”	1	Shy Shamrock: Left page
163795	4” x 4”	1	Shy Shamrock: Right page
159276	2 ¾” x 3 ¾”	2	Basic White: Left page
159276	5” x 3 ¾”	1	Basic White: Left page
159276	6 ¾” x 3 ¾”	1	Basic White: Right page
159276	3 ¼” x 3 ¾”	1	Basic White: Left page
159276	3 ¾” x 3 ¾”	1	Basic White: Right page
159276	2 ¾” x 4”	1	Basic White: Right page

Instructions:

1.    Follow the measurements guide and cut all cardstock and DSP as noted.

Left Side:

1.    Take one (1) 12” x 12” Basic Black Two-Tone. This will be your base.

2.    Take two (2) 2 ¾” x 3 ¾” Basic White and two (2) 3” x 4” Shy Shamrock. Adhere the Basic White to the center of the Shy Shamrock with your Stampin’ Seal. Set aside.

3.    Take one (1) 5” x 3 ¾” Basic White and one (1) 5 ¼” x 4” Shy Shamrock. Adhere the Basic White to the center of the Shy Shamrock with your Stampin’ Seal. Set aside.

4.    Take one (1) 3 ¼” x 3 ¾” Basic White and one (1) 3 ½” x 4” Shy Shamrock. Adhere the Basic White to the center of the Shy Shamrock with your Stampin’ Seal. Set aside.

5.    Take one (1) 2” x 12” On The Go, Luggage. Adhere horizontally to the center of your base with your Stampin’ Seal.

6.    Take two (2) ½” x 12” On The Go, Green Dots. Adhere above and below the On The Go, Luggage, with your Stampin’ Seal.

7.    Take the 5 ¼” x 4” Shy Shamrock/Basic White stack. Adhere with your Stampin’ Seal in the lower left corner of the page as shown in the image.

8.    Take one (1) ½” x 4” On The Go, Green Dots. Adhere vertically on the right side of the 5 ¼” x 4” Shy Shamrock/Basic White stack with your Stampin’ Seal as shown in the image.

9.    Take two (2) 3” x 4” Shy Shamrock/Basic White stacks. Adhere in the lower right corner of the page, and the lower center of the page with your Stampin’ Seal as shown in the image.

10. Take one (1) ½” x 4” On The Go, Green Dots. Adhere vertically on the left side of the far right 3” x 4” Shy Shamrock/Basic White stack with your Stampin’ Seal as shown in the image.

11. Take one (1) 3 ¾” x 4” On The Go, Green Drawing. Adhere in the upper right corner of the page with your Stampin’ Seal as shown in the image.

12. Select a card with writing from the On The Go set. Cut down to 4” x 4” and adhere with your Stampin’ Seal in the upper left corner of the page. For this layout, we chose the card with the map.

13. Take the ‘date’ stamp from the Tags To Go Cling Stamp Set and, using the Misty Moonlight Classic Stampin’ Pad, stamp on the card.

14. Take the 3 ½” x 4” Shy Shamrock/Basic White stack and adhere in the top center of the page with your Stampin’ Seal.

15. Take one (1) ½” x 3 ½” On The Go, Green Dots, and adhere across the top of the 3 ½” x 4” Shy Shamrock/Basic White stack with your Stampin’ Seal.

Right Side:

1.    Take one (1) 12” x 12” Basic Black Two-Tone. This will be your base.

2.    Take one (1) 7” x 4” Shy Shamrock, and one (1) 6 ¾” x 3 ¾” Basic White. Adhere the Basic White to the center of the Shy Shamrock with your Stampin’ Seal. Set aside.

3.    Take one (1) 4” x 4” Shy Shamrock, and one (1) 3 ¾” x 3 ¾” Basic White. Adhere the Basic White to the center of the Shy Shamrock with your Stampin’ Seal. Set aside.

4.    Take one (1) 2” x 12” On The Go, Luggage. Adhere horizontally to the center of your base with your Stampin’ Seal.

5.    Take two (2) ½” x 12” On The Go, Green Dots. Adhere above and below the On The Go, Luggage, with your Stampin’ Seal.

6.    Take one (1) 7” x 4” Shy Shamrock/Basic White stack. Adhere horizontally in the lower left corner of the page with your Stampin’ Seal.

7.    Take one (1) ½” x 7” On The Go, Green Dots. Adhere to the bottom of the 7” x 4” Shy Shamrock/Basic White stack with your Stampin’ Seal.

8.    Take one (1) 2 ¾” x 4” Basic White. Adhere in the lower left corner of the page with your Stampin’ Seal as shown in the image.

9.    Select a tag from the On The Go tag paper. Fussy cut the tag out and adhere to the 2 ¾” x 4” Basic White with your Stampin’ Seal.

10. Select a stamp from the Tags To Go Cling Stamp Set and, using the Misty Moonlight Classic Stampin’ Pad, stamp on the tag. For this layout, we chose the ‘Welcome Home’ stamp.

11. Take one (1) 1” x 4” On The Go, Green Drawing. Adhere vertically between the tag and 7” x 4” Shy Shamrock/Basic White stack with your Stampin’ Seal.

12. Take two (2) 4” x 3” On The Go, Green Drawing. Adhere in the top left and top right corners of your base with your Stampin’ Seal.

13. Take one (1) 4” x 4” Shy Shamrock/Basic White stack. Adhere in the top center of the page with your Stampin’ Seal as shown in the image.

Tip: This page set can be used for multiple occasions; just select the word you wish [or use a sentiment!]

NOTES:

1.    At the time of creation of this page set, all supplies were available on the Stampin’ Up website. However, items can be sold out or discontinued at any time. Feel free to use other supplies to make similar pages based on what you have available.

2.    If you would like to order any of the supplies, you will need to create an account online with your personal information – Demonstrators cannot keep personal information on customers. We have provided links to the supplies for ease of use [linked by item number] and can provide hard copy catalogs if desired as well.  If you need additional assistance, please reach out to info@mycraftingworkshop.com – we are more than happy to assist!